Northwest Magic - Forums

Go Back   Northwest Magic - Forums > Northwest Commons > Random Chats

Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2019, 04:17 AM
juniperqq juniperqq is offline
Member
 
Join Date: Aug 2018
Posts: 96
Default Standard installation processDo you know how to install t

Standard installation process

Do you know how to install the low cost Galvalumed steel plate?
1. Pre-class safety training and technical delivery.
2. Hoisting: According to the site conditions, the cranes should be selected reasonably according to the layout of the plates, and the corresponding number of the main ribs of the plates should be hoisted in order.
3. Under normal conditions, the board will be directly hoisted from the truck to the roof. If it is stacked on site, it is required that the height of each raft should not exceed 6 pieces and be stacked neatly.
4. When lifting, hang the hook on the sling of the main rib of the plate surface, and use a special lifting hook.
5. Check if the hook is sturdy before hooking. If there is any hidden danger, immediately inform the crane driver to re-hook.
6. When lifting, the board should be lifted at a constant speed. In the process, it is forbidden to stand under the boom. Place the plates in accordance with the drawings and place them on the steel beams or supports.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 07:52 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.