Northwest Magic - Forums

Go Back   Northwest Magic - Forums > Northwest Commons > Random Chats

Reply
 
Thread Tools Display Modes
  #1  
Old 12-25-2018, 04:03 AM
juniperqq juniperqq is offline
Member
 
Join Date: Aug 2018
Posts: 69
Default Different before and after the grinding disc is used

1. Different forms of wear
The depressed grinding disc in stock wears wear and wear in two forms. A represents wear and wear, and B and C represent broken wear discs representing the shedding of abrasive particles.
2. The cause of grinding disc wear
The depressed grinding disc in stock wear and wear. The high degree of mass in the workpiece causes mechanical wear of the abrasive particles, which is very serious when grinding certain hard-to-grind materials.
The depressed grinding disc in stock oxidation wear. Oxidation grinding in the air promotes. Grinding experiments conducted in a vacuum found that corundum grinding discs were much more difficult to grind low carbon steel than in air. This is because the convection of the air causes the grinding temperature to decrease and the oxygen in the air rapidly oxidizes the newly formed surface of the workpiece to form an oxide film, which reduces the possibility of adhesion of the abrasive. For some abrasives, the surface will be at a high temperature. Oxidation occurs, causing it to be gradually consumed, which is oxidative wear.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 02:03 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.